The hydraulic filter element is used in the hydraulic system. The function of the hydraulic filter element is to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. It can be seen that the hydraulic filter element is a particularly important part of the hydraulic system.
Under normal operation in the hydraulic system, the hydraulic filter element sometimes deforms. Generally speaking, the large deformation is caused by the overload of the hydraulic filter element. For example, hydraulic excavators generally need to replace the hydraulic oil after 2000 hours of operation, otherwise it will cause system pollution and system failure. It can be seen that the replacement cycle of the hydraulic oil filter element is generally determined by the working hours, the replacement of the hydraulic oil return filter element is 250 hours, and the subsequent replacement is only about 500 hours of work.
If the pressure difference of the hydraulic filter element is too high for a long time, the center tube will be crushed and the filter element will be deformed, which will cause the hydraulic system to work normally. If the pressure difference is always too high, the filtering effect will also be abnormal.The hydraulic filter element is not replaced in time for too long working time is the main cause of deformation. Failure to maintain the hydraulic filter element within the prescribed time will cause damage to the hydraulic filter element. Therefore, you must pay more attention to it during use.