Hydraulic pilot filter element fits inside the pilot filter housing which filters the hydraulic oil from the pump and sends it to the excavator manifold valve. 

Parts can vary depending on your serial number. Check the SINFT Cross Reference to ensure the correct part for your equipment.

Hydraulic pilot filter element fits inside the pilot filter housing which filters the hydraulic oil from the pump

SINFT® Pilot filter is used to filter the impurities in the pilot oil of hydraulic system

SINFT® Pilot filter is used to filter the impurities in the pilot oil of hydraulic system. The pilot oil controls the operation of each valve element and hydraulic system. The pilot system can use small flow to control large flow. And also when the driver stops pushing and pulling the control lever, the pilot valve will close. So as to cut off the oil circuit, It won’t need return filter. They are sensitive components and can only see a small amount of traffic. It is easy to filter the entire system to the required level of cleanliness.

Originally designed to protect the pilots of pilot loaded regulators. However, their steel construction allows them to be used in any application up to 1,000 psig and come with a standard 5 micron element. Pilot Filters are available in ¼" x 90° or ¼" x 180° configurations, with NPT(F) connections.

To order your hydraulic oil filter element or for more information and advice, please Contact or email iris@sinftfilter.com

Or, if you require further, expert technical advice with your order, need assistance in ensuring you are choosing the best hydraulic filter element and housing for your application, need help identifying a replacement part but don't have all the information available, or need a replacement for an obsolete model, talk to our Technical Team, consisting of experts within their field in the hydraulic industry, who will be more than happy to help! sft-sales4@sinftfilter.com
->